Home | Home | Home Improvement
There are two main types of lighting you can use in a studio. They are the continuous or tungsten and flash. The use of continuous lighting in a studio environment is more traditional. It is inexpensive compared to the electronic flash and easy on your pocket. Unlike a flash light, you can clearly see where the shadow falls or where exactly the light falls. Tungsten lighting got many disadvantages too. The main one is the heat it produces and sometimes it is even considered to be intolerable. The color of the lighting is more yellowish and as the filament in the bulb burns as time goes by, the coloring gets worse. This cause problem if you are using slides to shoot. If you are using print film, this can be corrected while printing. So does if you are shooting digitally. You may need to modify your camera with a filter fitted to your lens or use a tungsten balanced color film. Another way of getting out of the situation is to shoot in black & white. The heat produced while using tungsten is the heat it produces. This heat can be very uncomfortable and the brightness may make your model to close the eyes. It will reflect directly on the photos shot by you. You might have seen several photos where the individuals close their eyes or shrink it. This is all because of the trouble caused by the lighting arrangement. The second studio lighting is the electronic flash. Most of the studio cameras are fitted with an on-camera flashgun. It makes it difficult to know what exactly the lighting effect will be on your subject. This problem can be solved by using a modeling lamp. The lamp will be low-powered so it will not produce unbearable heat or brightness. It is placed exactly in the centre of the flash tube so that the light it produces is the same as that of the flashgun. This gives an advantage of choosing the exact angle and be sure about the quality the flash is going to give you. The flash light being stronger than the low-powdered modeling lamp, the shadows tend to get darker and the object will be lighter. The flash light is more consistent. It has no problem of burning out as it ages and is more balanced to daylight. You do not need to use a filter for your camera lens and it is easy on slide film or print film. It is something preferred by the professionals mostly. The amount of power given out by modern flash units is very high. It is measured in watts/second or joules. The advanced technology makes the studio lighting systems much simpler and especially makes the studio flash much more effective. There are a lot of accessories to choose from which will give you the exact results you want. Before buying, conduct a good research about the product you are to purchase so that you do not fall on the wrong hands. http://www.sharpics.com/
Article Source: http://www.articlebase.info
Great product photography requires a seamless white background, good studio lighting, background support stand, and a steady camera. Improve your image with Sharpics photo studio accessories.
Please Rate this Article
5 out of 54 out of 53 out of 52 out of 51 out of 5
Not yet Rated
